✨ How to Add Charms & Accessories to Your Phone Case ✨

The Look: Cute, functional, trendy

How To:

1. Thread the strap loop through your phone case's charging port or lanyard hole
2. Pull the charm end through the loop to secure it
3. Adjust the length so the charm hangs at your desired position
4. Add additional charms using jump rings if desired

💡 Best For: Clear cases, cases with built-in lanyard holes, minimalist cases. Perfect for adding personality without permanent changes!

The Look: Clean, versatile, removable

1. Clean the back of your phone case with rubbing alcohol
2. Let it dry completely (2-3 minutes)
3. Peel the backing off the adhesive charm holder
4. Press firmly onto the back of your case for 30 seconds
5. Wait 24 hours before attaching heavy charms
6. Clip your charms onto the holder

The Look: Colorful, personalized, Y2K vibes

1. Cut cord to desired length (usually 6-8 inches)
2. Attach one end to phone strap attachment or lobster clasp
3. String beads in your desired pattern (spell names, create patterns)
4. Tie off the other end securely
5. Seal cord ends with lighter (carefully!) to prevent fraying
6. Attach to your phone case

The Look: Functional, secure, hands-free

1. Thread the strap attachment through your case opening
2. Secure with the provided loop or clasp
3. Adjust the wrist loop to fit comfortably
4. Optional: Add beads or small charms to the strap for decoration

The Look: Cute, collectible, easy to swap

1. Attach a phone strap or adhesive charm holder to your case
2. Use the keychain's existing ring to attach to the strap
3. If the keychain doesn't have a ring, add a jump ring
4. Clip it on and you're done!

The Look: Boho, textured, playful

1. Attach phone strap to your case
2. Thread tassel loop through the strap
3. Pull tassel through its own loop to secure
4. Fluff and arrange the tassel

The Look: Functional + decorative

1. Attach phone ring holder to the back of your case
2. Let adhesive cure for 24 hours
3. Glue small charms around the ring base
4. Or attach charms with jump rings to the ring itself

The Look: Feminine, coquette, romantic

1. Cut ribbon to desired length (6-8 inches for medium bow)
2. Create bow shape and secure center with glue
3. Glue bow to back of phone case or to a phone strap
4. Add pearls or rhinestones to bow center for extra glam

The Look: Protected, customizable, layered

1. Arrange stickers on the INSIDE of your clear case
2. Press firmly to avoid air bubbles
3. Trim any stickers that hang over edges
4. Snap case onto your phone

The Look: Trendy, hands-free, fashion-forward

1. Attach lobster clasps to both corners of your phone case
2. Clip the chain or strap onto the clasps
3. Adjust length for crossbody, shoulder, or wrist carry
4. Optional: Add charms to the chain for extra style