Best selling products

Carry a bit of Britain wherever you go. This MagSafe-compatible tough iPhone case wraps your phone in a bold, photo-realistic Union Jack that pops with vibrant color. The dual-layer construction—rigid polycarbonate shell with a cushioned TPU liner—absorbs shocks and resists scratches so your device stays camera-ready after everyday knocks. Built-in magnets align with MagSafe accessories for streamlined charging and snap-on convenience. Choose glossy for high-shine brilliance or matte for a refined, glare-free finish. Lightweight yet impact-resistant, it’s made to live in a commuter’s pocket, a festival pack, or a traveler’s hand luggage, keeping the phone protected and proudly British.

Product features
- Dual-layer protection: rigid polycarbonate shell with cushioned TPU liner for impact resistance
- High-resolution full-wrap print: 300+ DPI, vibrant photo-realistic UK flag design
- MagSafe-compatible: embedded magnets for alignment with MagSafe accessories
- Finish options: available in glossy or matte premium protective finish
- Lightweight and durable: flexible, scratch-resistant construction suitable for daily use

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

Protect your phone with this tough, dual-layer case. Its impact-resistant shell and shock-absorbing liner keep your device safe, while built-in MagSafe® magnets ensure secure attachment and faster wireless charging.

• Polycarbonate outer shell
• Thermoplastic Polyurethane inner liner
• Dual-layer protection
• Precisely aligned port openings
• MagSafe® compatible
• Induction charging-compatible
• Matte or gloss finish
• Blank product sourced from Korea

Disclaimer: Keep away from liquids containing high alcohol levels, as designs on the phone case may rub off. Keep away from direct sunlight to prevent yellowing.

Important: This product can’t be shipped to South Korea, Hong Kong, Taiwan, Japan, or Singapore. If your shipping address is in these regions, please choose a different product.

Understated, modern protection that slips into daily life without shouting. This slim, impact-resistant phone case pairs a rigid polycarbonate shell with a cushioned TPU liner to absorb shocks and guard against scratches. The full-wrap print shows a minimal geometric grid in muted tones, giving the case a refined, architectural feel that ages gracefully. Choose glossy or matte finishes to match how you carry your phone—subtle shine or quiet texture—while built-in magnets maintain MagSafe® compatibility for fuss-free attachment and charging. Lightweight but durable, it’s designed to keep your device safe through commuting, meetings, and weekend plans.

Product features
- Dual-layer construction: rigid polycarbonate shell with inner TPU liner for impact resistance
- Full-wrap, high-resolution print (300+ DPI) for crisp, vibrant graphics
- Choice of glossy or matte premium finish to suit your aesthetic
- Embedded magnets for MagSafe® compatibility with supported accessories
- Slim profile with durable, flexible materials that protect against scratches and minor bumps

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

This slim, impact-resistant phone case brings a refined, textural look to everyday carry. The deep, woven carbon-fiber pattern wraps fully around the exterior in high-resolution color, giving the case a subtle, dimensional sheen whether you choose glossy or matte. Inside, a cushioned black TPU liner locks into a rigid polycarbonate shell for dual-layer protection that absorbs shocks and resists scratches. Built-in magnets make it work smoothly with MagSafe® accessories, while the precise cutouts keep buttons and cameras unobstructed. It sits light in hand but stands up to daily knocks — a thoughtful balance of form and function for someone who appreciates low-key, durable style.

Product features
- Dual-layer construction: rigid polycarbonate shell with cushioned TPU inner liner for shock absorption
- High-resolution full-wrap print (300+ DPI) available in glossy or matte finishes
- Embedded MagSafe®-compatible magnets for accessory use and charging
- Durable, flexible, impact-resistant materials that resist scratches and minor bumps
- Precision cutouts for buttons and camera; supports latest iPhone 17 series models

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

This impact-resistant phone case brings quiet, modern style to everyday protection. The smooth, layered earth-tone design wraps fully around the shell in a high-resolution print, while a cushioned black TPU liner absorbs shocks and guards against scratches. Built with a rigid polycarbonate exterior and an inner TPU layer, the case clicks securely onto your phone and includes an embedded magnet for MagSafe®-style accessories. Choose glossy or matte finish to match your look. It’s tough where it matters and intentionally simple — a subtle statement for people who value clean design and reliable protection during daily commutes, hikes, or long days at a desk.

Product features
- Dual-layer construction: rigid polycarbonate outer shell with cushioned inner TPU liner for impact resistance
- Full-wrap, 300+ DPI print: vibrant, photo-realistic earth-tone design across the exterior
- MagSafe® compatible: embedded interior magnets for attachment/charging with MagSafe® accessories
- Finish options: available in glossy or matte premium protective finishes
- Precise fit and protection: durable, flexible, scratch-resistant with full camera and port access

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

A rugged, impact-resistant phone case built for people who treat their devices like tools. This dual-layer shell combines a hard polycarbonate exterior with a cushioned TPU liner to absorb shocks while keeping a slim profile. The case features full-wrap printing with options for glossy or matte finishes, and discreet interior magnets for MagSafe®-style accessory alignment. Textured chevron patterning on the back adds grip and a tactile, utilitarian look that hides everyday wear. Made for everyday use and newer iPhone models, it’s a no-nonsense protector that keeps your phone looking sharp and functioning reliably.

Product features
- Dual-layer construction: rigid polycarbonate shell plus cushioned TPU liner for extra impact resistance
- MagSafe® compatible: embedded interior magnets for alignment with MagSafe® accessories
- Finish options: choose glossy or matte premium protective surface with full-wrap print
- High-resolution print: 300+ DPI photo-realistic color across the exterior
- Textured grip: chevron pattern back for added traction and scratch resistance

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

This slim, impact-resistant phone case blends tech-minded style with everyday protection. The matte black background is etched with a subtle circuit-board pattern that reads modern and minimalist up close, while the dual-layer construction (hard polycarbonate shell plus a cushioned TPU liner) absorbs shocks and guards against scratches. The full-wrap print keeps the design consistent around edges, and embedded magnets support MagSafe® accessories so charging and mounts line up without fuss. It slips on snugly, keeps buttons responsive, and keeps your phone looking like it belongs on a desk or at a hackathon.

Product features
- Dual-layer construction: rigid polycarbonate shell with cushioned TPU liner for impact resistance
- MagSafe® compatible: embedded magnets for alignment with MagSafe accessories
- Premium finish options: available in matte or glossy with full-wrap print
- High-quality print: 300+ DPI photo-realistic, vibrant and durable graphics
- Precise fit & protection: raised edges, responsive button covers, and shock-absorbing design

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

Sleek, protective phone case that brings quiet mountain vibes to your daily carry. The layered polycarbonate shell with a cushioned TPU liner absorbs knocks while a high-resolution, full-wrap print traces overlapping ridgelines in calming grayscale. Choose glossy for striking contrast or matte for a soft, understated finish. Built-in magnets support MagSafe accessories so the case works with compatible chargers and mounts. Lightweight and durable, it keeps the phone safe without hiding its slim profile — a subtle, rugged companion for people who prefer minimalist outdoor-inspired style.

Product features
- Dual-layer protection: rigid polycarbonate outer shell with cushioned TPU inner liner for impact resistance
- 300+ DPI full-wrap print: photo-realistic, vibrant grayscale mountain design
- Finish options: available in glossy or matte premium protective finishes
- MagSafe® compatible: embedded interior magnets for use with compatible MagSafe accessories
- Durable and lightweight: flexible, impact-resistant construction designed for everyday use

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

A slim, impact-resistant phone case that carries a quiet outdoorsy mood. Deep forest green wraps the full exterior in a topographic contour pattern, giving a tactile sense of trails and elevation even before you pick it up. The dual-layer construction—rigid polycarbonate shell with a cushioned TPU inner liner—absorbs bumps while keeping edges snug around your phone. Available in glossy or matte finishes, and built with embedded MagSafe-compatible magnets, this case blends everyday protection with a subtle, map-inspired aesthetic that fits into an active, nature-minded lifestyle.

Product features
- Dual-layer protection: rigid polycarbonate shell plus cushioned TPU inner liner for shock absorption
- Full-wrap, photo-realistic print at 300+ DPI for vivid, long-lasting color
- Matte or glossy premium finish options to suit your style
- Embedded magnets for MagSafe® compatibility with supported accessories
- Durable, flexible and impact-resistant construction for daily wear and drop protection

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

This slim, impact-resistant phone case wraps your device in a sleek, neon-grid design that reads like a slice of futuristic cityscape. The dual-layer shell—rigid polycarbonate outside with a cushioned TPU liner—feels solid in hand while absorbing day-to-day shocks and scratches. The full-wrap, high-resolution print keeps those electric teal lines sharp against a deep matte or glossy black field. Built-in magnets add MagSafe® compatibility for snap-on chargers and accessories, so your phone looks striking without sacrificing modern convenience. It slips on easily, protects confidently, and gives your phone an unmistakable cyber-tech edge.

Product features
- Dual-layer construction: rigid polycarbonate shell with cushioned TPU liner for impact resistance
- High-resolution full-wrap print: 300+ DPI for vivid neon grid graphics
- Finish options: choose glossy or matte premium surface
- MagSafe® compatible: embedded interior magnets for snap-on accessories
- Durable and flexible: scratch-resistant, lightweight protection for daily use

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

This impact-resistant phone case brings a rugged, earthy aesthetic to everyday carry. The cracked-stone pattern wraps the shell in muted gray tones that hide wear and blend with urban and outdoor styles. A dual-layer build — rigid polycarbonate shell plus cushioned TPU liner — absorbs shocks while keeping the profile slim. Interior magnets add MagSafe®-style convenience for compatible chargers and accessories. Choose matte for a low-sheen, tactile finish or glossy for richer tones and easy wipe-clean care. It’s engineered for reliable protection during commutes, hikes, and daily life with photo-quality full-wrap printing that keeps the design continuous around the sides.

Product features
- Dual-layer construction: rigid polycarbonate shell with cushioned TPU liner for impact resistance
- MagSafe® compatible: embedded interior magnet for alignment with compatible accessories
- Finish options: available in matte or glossy premium protective finishes
- Full-wrap, high-resolution print: 300+ DPI photo-realistic printing across exterior surfaces
- Slim protective profile: flexible yet durable materials for shock absorption without bulk

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

This slim, impact-resistant phone case brings molten-dark florals to your daily carry. Deep lava-red blooms swirl across a full-wrap surface, their glossy or matte finish catching light in different ways. The dual-layer construction—rigid outer polycarbonate with a cushioned TPU liner—absorbs knocks and resists scratches while keeping the phone’s slim profile. Built-in magnets align with MagSafe accessories so charging and mounts sit securely. Carry a piece that reads like a late-night garden: moody, tactile, and ready for life on the move.

Product features
- Dual-layer protection: rigid polycarbonate shell with cushioned inner TPU liner
- MagSafe compatible: embedded interior magnets for Apple accessory alignment
- High-resolution full-wrap print: 300+ DPI photo-realistic lava-red floral artwork
- Finish options: choose glossy or matte premium protective surface
- Impact resistant and scratch resistant for everyday use

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

Thin but rugged. This impact-resistant iPhone case keeps your phone looking crisp while shrugging off daily knocks. The Frozen Flower design feels like a cool breath of winter—petals frozen in place, colors sharp against a clean background. The glossy or matte finish makes the artwork pop how you want it, and the dual-layer construction (hard polycarbonate shell with cushioned TPU liner) softens drops and prevents scratches. Embedded magnets align with MagSafe accessories so your charger and mounts click into place. It’s a choice for people who value both art and protection—carry a small, serene moment in your pocket every day.

Product features
- Dual-layer protection: hard polycarbonate shell with inner TPU liner for impact resistance
- High-resolution full-wrap print (300+ DPI) for vibrant, photo-realistic colors
- Available in glossy or matte premium finish to enhance the Frozen Flower artwork
- MagSafe-compatible embedded magnet for alignment with Apple accessories
- Durable, flexible construction designed for new iPhone 17 series and other models

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

This floral phone case brings soft, vintage charm to everyday carry. Cushioned TPU lines and a rigid polycarbonate shell wrap your phone in reliable, impact-resistant protection while a full-wrap, photo-quality print of pastel roses, chrysanthemums, and daisies adds a calming, feminine touch. The built-in magnet keeps MagSafe accessories aligned and the glossy or matte finish options let you choose a subtle sheen or a velvety look. Lightweight and durable, it’s designed to handle daily knocks without sacrificing style—carry a small piece of garden tranquility with you.

Product features
- Dual-layer protection: rigid polycarbonate shell with cushioned inner TPU liner
- MagSafe-compatible: embedded interior magnets for accessory alignment
- High-resolution full-wrap print: 300+ DPI photo-realistic floral artwork
- Finish options: available in glossy or matte premium protective finish
- Impact resistant and flexible: durable against scratches and minor bumps

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

A slim, impact-resistant phone case wrapped in a soft, vintage-inspired blue floral print. The dual-layer construction pairs a rigid polycarbonate shell with a cushioned TPU liner, so the case feels sturdy at the edges and gentle where the phone meets the liner. The full-wrap artwork shows delicate roses and daisies in muted blues and whites, giving the phone a quiet, romantic mood that settles into everyday life — from morning coffee to evening walks. Built-in magnets enable MagSafe® accessories and charging, while glossy or matte finishes let you choose subtle sheen or a low-reflective look. This case keeps your device protected without sacrificing a gentle, feminine aesthetic.

Product features
- Dual-layer protection: rigid polycarbonate outer shell with cushioned TPU inner lining for impact resistance
- MagSafe® compatible: embedded magnets for use with MagSafe accessories (compatibility not guaranteed with non-Apple chargers)
- High-resolution full-wrap print: 300+ DPI photo-realistic floral artwork across exterior surfaces
- Finish options: available in glossy or matte premium protective finishes
- Durable and flexible materials: 100% polycarbonate shell with slight texture/color variations; made for new iPhone 17 series and other recent models

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

A slim, impact-resistant phone case wrapped in an artful vintage floral print. Soft blush roses and sunlit daisies float across a muted blue backdrop, giving the case an antique, hand-painted feel. The hard polycarbonate shell with a cushioned TPU interior takes everyday knocks while keeping the phone’s lines sleek. Built-in magnets add MagSafe® compatibility so the case works smoothly with magnetic chargers and accessories. Choose glossy for a luminous, saturated finish or matte for a subdued, tactile look that hides fingerprints. This case blends protective function with quietly romantic style — made for people who want their everyday tech to feel thoughtful and lived-in.

Product features
- Dual-layer protection: rigid polycarbonate shell with cushioned TPU inner lining for impact resistance
- MagSafe® compatible: embedded interior magnets for magnetic chargers and accessories
- Finish options: available in glossy or matte premium protective surface
- High-resolution full-wrap print: 300+ DPI photo-realistic colors covering exterior surfaces
- Durable material: flexible, scratch-resistant polycarbonate with a snug fit for new iPhone models (including iPhone 17 series)

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

A lightweight, impact-resistant phone case that blends everyday protection with a soft, vintage floral look. The dual-layer build pairs a rigid polycarbonate shell with a cushioned TPU liner to absorb shocks and guard against scratches. Full-wrap, photo-realistic printing delivers crisp pastel blooms across the entire exterior, available in a glossy or matte finish. Built-in interior magnets support MagSafe® accessories so the case stays compatible with Apple’s magnetic chargers and mounts. Slim at the edges but rugged where it counts, this case feels secure in hand while keeping your phone looking gently curated and feminine.

Product features
- Dual-layer protection: rigid polycarbonate shell + cushioned TPU liner for shock absorption
- Full-wrap, 300+ DPI photo-realistic print with soft pastel floral design
- Choice of glossy or matte premium finish
- Embedded interior magnets for MagSafe® compatibility
- Durable, flexible, and impact-resistant construction

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

A slim, protective phone case wrapped in a vintage floral print that feels like a pocket of late-afternoon sunlight. The bright, painterly blooms—burnt orange, soft peach, and golden yellow—flow across a warm cream background for a quietly joyful look. The rigid outer shell plus cushioned TPU liner absorb everyday bumps while the full-wrap print keeps the pattern visible from every angle. Built-in magnets support MagSafe® accessories so the case moves with modern life: quick charges, hands-free mounts, and wallet attachments. This case balances dependable protection with an artisanal, feminine aesthetic that complements bicycles, tote bags, and coffee-shop afternoons.

Product features
- Dual-layer protection: rigid polycarbonate outer shell with a cushioned TPU inner liner for impact resistance
- Photo-realistic full-wrap print at 300+ DPI for crisp, vibrant floral colors
- Finish options: choose glossy or matte premium surface
- MagSafe® compatible: embedded magnets to work with MagSafe accessories (compatibility not guaranteed with non-Apple chargers)
- Slim fit with precise cutouts; supports new iPhone 17 series and other recent models

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

This slim, impact-resistant phone case wraps your device in a vintage-inspired floral print—muted roses and warm blooms set against a deep, inky background. The dual-layer construction pairs a rigid polycarbonate outer shell with a cushioned TPU liner to absorb shocks and guard against everyday bumps and scratches. A full-wrap, high-resolution print keeps the pattern continuous around edges. Choose glossy or matte finish to match your style; interior magnets add MagSafe® compatibility for easy mounting and charging. It’s a blend of retro charm and practical protection that slips into your day without fuss.

Product features
- Dual-layer protection: rigid polycarbonate shell plus inner TPU liner for impact resistance
- Full-wrap, photo‑quality print (300+ DPI) with continuous design around edges
- Available in glossy or matte premium finish
- Built-in interior magnets for MagSafe® accessory compatibility
- Durable, flexible materials designed for scratch and minor bump protection

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

A protective phone case that blends vintage floral elegance with modern, everyday toughness. The rich, painterly roses and leafy spray sit against a deep, moody background — a quiet statement that complements both a workbag and weekend coat. Built with a cushioned inner TPU liner and rigid polycarbonate shell, it soaks up daily bumps while keeping the print bright and fully wrapped around the edges. Magnetic inserts let it work smoothly with MagSafe chargers and accessories, and you can choose a glossy sheen for vivid color pop or a matte finish for a soft, tactile feel. It’s the kind of case that feels like a small luxury every time you pick up your phone: protective, pretty, and made to travel with you.

Product features
- Dual-layer construction: rigid polycarbonate shell with cushioned TPU liner for impact resistance
- Full-wrap, photo-quality print at 300+ DPI for vibrant, detailed colors
- Available in glossy or matte premium finish to suit your tactile preference
- Embedded magnets for MagSafe compatibility with Apple accessories
- Durable, flexible materials and precise cutouts for new iPhone 17 series and other recent models

Care instructions
- Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: Blank product sourced from China, For adults

Care instructions: Clean the case with soft, damp cotton or microfiber cloth. Avoid using chemicals.

Esta resistente funda magnética para teléfono combina protección confiable con un discreto orgullo. Un fondo azul marino intenso enmarca la cálida silueta dorada de Kosovo, rodeada de sutiles anillos concéntricos y cinco estrellas pálidas en lo alto. El resultado es sobrio y elegante: una pieza para el día a día que combina a la perfección con jeans, chaquetas o un bolso de trabajo, y que mantiene tu teléfono seguro a la vez que muestra una discreta conexión con tu hogar o tu herencia. El módulo compatible con MagSafe se acopla fácilmente a los accesorios, y su construcción de doble capa amortigua los impactos sin añadir volumen. Elige el acabado brillante para un brillo intenso o el mate para un acabado refinado y poco reflectante.

Características del producto
- Construcción de doble capa: carcasa de policarbonato + revestimiento de silicona TPU para resistencia al impacto
- Módulo magnético compatible con MagSafe para una fijación segura de accesorios
- Impresión 3D envolvente con alta densidad de tinta para imágenes de borde a borde
- Disponible en acabados brillantes o mate con puertos transparentes y abiertos para acceso.
- Fabricado en Corea del Sur; apto para uso de adultos; compatible con los nuevos modelos de la serie iPhone 17

Instrucciones de cuidado
Limpie la carcasa con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de Corea del Sur. Para adultos.

Instrucciones de cuidado : Limpie la funda con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Esta resistente funda magnética envuelve tu teléfono en un collage de sellos de amor de inspiración vintage: rosas suaves, corazones brillantes y letras coloridas que recuerdan a un fajo de notas enviadas por correo. La carcasa de doble capa sella una impresión brillante (o mate) con una cobertura 3D completa, para que la obra de arte continúe por los bordes. En el interior, un forro de silicona TPU que absorbe los impactos amortigua los golpes, mientras que un módulo magnético integrado la mantiene compatible con accesorios MagSafe®. Los recortes transparentes mantienen los puertos y las cámaras accesibles. Es una funda para quienes buscan protección sin sacrificar la personalidad: un toque nostálgico, un toque divertido, diseñada para resistir el uso diario y mantener su alegre diseño visible dondequiera que vayas.

Características del producto
- Impresión 3D envolvente para un diseño continuo de borde a borde
- Protección de doble capa: carcasa de policarbonato + revestimiento de silicona TPU
- Módulo magnético integrado compatible con MagSafe®
- Resistente a impactos con interior que absorbe los golpes.
- Disponible en acabado brillante o mate con acceso al puerto transparente.

Instrucciones de cuidado
Limpie la carcasa con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de Corea del Sur. Para adultos.

Instrucciones de cuidado : Limpie la funda con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Una funda delgada y protectora que transmite un romance divertido y dibujado a mano en cada centímetro. Su carcasa de doble capa combina un exterior de policarbonato 100 % brillante o mate con un revestimiento de silicona TPU que absorbe los impactos y un módulo magnético integrado para un uso impecable de MagSafe®. Pequeños corazones, rosas, cartas de amor y espejos se extienden por la superficie en una suave paleta de rojos y rosas, creando una atmósfera alegre e íntima al sostener el teléfono. Se siente resistente en la mano y mantiene los puertos abiertos para facilitar la carga y el acceso a accesorios. Fabricada con materiales duraderos y resistentes a los impactos, procedentes de Corea del Sur, esta funda combina la protección diaria con un estilo romántico y caprichoso, ideal para quienes disfrutan de un toque de cariño con sus dispositivos electrónicos.

Características del producto
- Construcción de doble capa: carcasa 100 % policarbonato con revestimiento de silicona 100 % TPU para absorción de impactos
- Módulo magnético incorporado compatible con accesorios MagSafe®
- Impresión 3D envolvente completa para obras de arte de borde a borde, de alta densidad, en acabados brillantes o mate
- Materiales duraderos y resistentes a los impactos con puertos transparentes y abiertos para conectividad.
- Fabricado en Corea del Sur; nuevos modelos de la serie iPhone 17 disponibles

Instrucciones de cuidado
Limpie la carcasa con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de Corea del Sur. Para adultos.

Instrucciones de cuidado : Limpie la funda con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Esta funda delgada y resistente le da un toque romántico y divertido a tu teléfono diario. Su resistente carcasa de doble capa combina un exterior de policarbonato duro con un forro de silicona TPU que absorbe los golpes, para que tu teléfono luzca encantador y protegido de los golpes diarios. El diseño impreso brillante/mate envuelve completamente la funda con colores intensos y de alta densidad: corazones, rosas, lápiz labial y pequeñas notas de amor dispuestas como un garabato espontáneo sobre un fondo suave. Los imanes compatibles con MagSafe facilitan la colocación de cargadores y accesorios, mientras que los puertos abiertos y los recortes precisos mantienen tu teléfono completamente usable. Es ligera, resistente a los impactos y está fabricada con atención al detalle en Corea del Sur.

Características del producto
- Construcción de doble capa: carcasa 100 % policarbonato + revestimiento de silicona 100 % TPU para resistencia al impacto y absorción de impactos.
- Impresión 3D envolvente con alta densidad de tinta para un diseño vívido de borde a borde
- Módulo magnético compatible con MagSafe para una fácil fijación a accesorios y cargadores
- Disponible en acabados brillantes o mate con recortes claros y precisos para puertos y cámaras.
- Fabricado en Corea del Sur; compatible con los últimos modelos de la serie iPhone 17; uso para adultos

Instrucciones de cuidado
Limpie la carcasa con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de Corea del Sur. Para adultos.

Instrucciones de cuidado : Limpie la funda con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Una funda delgada y resistente que aporta un estilo floral audaz sin sacrificar la protección. Su brillante diseño en rojo y rosa presenta un estampado integral de rosas y hojas, transferido a todo color, que le da un toque fluido en las esquinas y mantiene su vitalidad con el paso del tiempo. En el interior, un suave forro de silicona TPU amortigua los golpes, mientras que la carcasa rígida de policarbonato resiste los impactos. Fabricada con un módulo magnético compatible con accesorios MagSafe® y puertos de carga precisos, esta funda de doble capa combina practicidad diaria con un diseño atractivo. Es ligera, con bordes adherentes y está disponible en acabados brillante o mate para adaptarse al uso que le des a tu teléfono.

Características del producto
- Impresión 3D envolvente con alta densidad de tinta para una cobertura de diseño perfecta
- Construcción de doble capa: carcasa 100 % policarbonato más revestimiento de silicona 100 % TPU para absorción de impactos
- Módulo magnético compatible con MagSafe® para una fijación segura de accesorios
- Recortes claros y precisos para puertos y botones con fácil acceso a los controles.
- Disponible en acabados brillantes o mate; resistente a los impactos y procedente de Corea del Sur.

Instrucciones de cuidado
Limpie la carcasa con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de Corea del Sur. Para adultos.

Instrucciones de cuidado : Limpie la funda con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Esta delgada y resistente funda magnética para teléfono le da un toque romántico y divertido a tu día a día. Su carcasa de doble capa combina un estampado 3D brillante (o mate) con un forro de TPU que absorbe los golpes para protegerte de las caídas, a la vez que luce un dibujo a mano de corazones en cálidos tonos rojos y rosados. El módulo magnético compatible con MagSafe mantiene los cargadores inalámbricos y accesorios alineados, mientras que los recortes precisos dejan los puertos y las cámaras despejados. Ligera pero resistente a los impactos, la funda es una pequeña y alegre declaración de intenciones, ideal para quienes prefieren proteger su tecnología y darle un toque sentimental.

Características del producto
- Construcción de doble capa: carcasa exterior de policarbonato con revestimiento de silicona 100 % TPU para una mayor protección contra caídas
- Impresión envolvente 3D: transferencia de imágenes de alta densidad y cobertura total en acabado brillante o mate
- Compatible con MagSafe: incluye módulo magnético para una alineación segura con los accesorios MagSafe
- Ajuste de precisión: puertos abiertos y recortes de cámara transparentes para una fácil conectividad y uso
- Materiales duraderos: construcción resistente a impactos procedente de Corea del Sur; compatible con los nuevos modelos de la serie iPhone 17

Instrucciones de cuidado
Limpie la carcasa con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de Corea del Sur. Para adultos.

Instrucciones de cuidado : Limpie la funda con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Lleva un poco de amor a todas partes. Esta resistente funda magnética envuelve tu dispositivo con un divertido diseño dibujado a mano de corazones, rosas, cupcakes y pequeños cuadrados de calendario: rosas suaves y neutros cálidos que se sienten como una nota privada guardada en tu bolsillo. La delgada carcasa, brillante o mate, mantiene la vivacidad del diseño, mientras que un forro acolchado de TPU absorbe los golpes y protege los bordes. Se ajusta con seguridad a los accesorios MagSafe, deja los puertos despejados y resiste los golpes diarios sin perder su encanto. Úsala en las mañanas tranquilas con un café, mientras revisas los mensajes de alguien que te importa o como un dulce toque final para tus citas y planes de San Valentín.

Características del producto
- Protección de doble capa: carcasa rígida de policarbonato con revestimiento de silicona TPU para resistencia al impacto
- Módulo magnético compatible con MagSafe para una fijación segura de accesorios
- Impresión envolvente 3D para obras de arte de alta densidad y cobertura total
- Elección de acabado brillante o mate con acceso al puerto transparente
- Fabricado en Corea del Sur; compatible con los nuevos modelos de la serie iPhone 17

Instrucciones de cuidado
Limpie la carcasa con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de Corea del Sur. Para adultos.

Instrucciones de cuidado : Limpie la funda con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Esta funda protectora para teléfono le da un toque divertido y romántico a tu día a día. Un fondo rosa suave está salpicado de corazones, rosas, sobres, llaves y la palabra "LOVE" dibujados a mano, creando un alegre patrón de garabatos que ilumina tu bolsillo o bolso. La carcasa de doble capa con forro de silicona TPU amortigua las caídas, mientras que el exterior de policarbonato es resistente a los arañazos. Los finos recortes mantienen los puertos accesibles, y el módulo magnético integrado es compatible con accesorios MagSafe® para facilitar su montaje y carga. Elige el acabado brillante para un brillo vibrante o el mate para un aspecto más suave y aterciopelado: cualquiera de los dos acabados mantiene la ilustración nítida con una cobertura total alrededor de los bordes.

Características del producto
- Impresión 3D completa con alta densidad de tinta y transferencia de imagen.
- Construcción de doble capa: carcasa 100 % policarbonato + revestimiento de silicona 100 % TPU para absorción de impactos
- Módulo magnético compatible con MagSafe® incluido
- Disponible en acabados brillantes o mate con acceso a puerto transparente y abierto.
- Materiales duraderos y resistentes a los impactos; procedentes de Corea del Sur; compatible con la nueva serie iPhone 17

Instrucciones de cuidado
Limpie la carcasa con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de Corea del Sur. Para adultos.

Instrucciones de cuidado : Limpie la funda con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Una funda fina y brillante para teléfono, decorada con divertidos iconos navideños: pan de jengibre, flores de Pascua, adornos y regalos envueltos, que aporta calidez y alegría festiva a tu día a día. Su diseño discreto mantiene tu teléfono elegante, mientras que el bisel elevado y plano protege la pantalla de pequeños arañazos. Fabricada en policarbonato Lexan ligero y resistente a impactos con protección UV para preservar una calidad de impresión vibrante. Admite carga inalámbrica y su acabado liso y brillante realza su colorido diseño sobre un fondo neutro. Lleva un toque de alegría navideña con un toque artesanal y acogedor cada vez que uses tu teléfono.

Características del producto
- El bisel plano protege la pantalla de pequeños arañazos.
- Policarbonato Lexan con protección UV para impresiones vibrantes y duraderas
- Acabado brillante y súper delgado que admite carga inalámbrica.
- Construcción duradera, resistente a los impactos y, al mismo tiempo, ligera.
- Disponible para los últimos modelos de la serie iPhone 17

Instrucciones de cuidado
- Limpie con un paño húmedo de algodón o microfibra. Añada una gota de jabón lavavajillas al paño si es necesario.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de China, Para adultos

Instrucciones de cuidado : Limpiar con un paño húmedo de algodón o microfibra. Añadir una gota de jabón lavavajillas al paño si es necesario.

Esta resistente funda magnética para teléfono aporta un toque navideño y acogedor a tu día a día. Su diseño envolvente presenta muñecos de nieve sonrientes, figuras de jengibre, adornos y acebo sobre un cálido fondo burdeos: un estampado alegre y vintage que alegra tus desplazamientos, los mercados de invierno y las noches horneando galletas. Su construcción de doble capa y el forro de silicona protegen tu dispositivo de caídas, mientras que el módulo magnético integrado mantiene los accesorios MagSafe® en su lugar. Elige el acabado brillante para un toque de color vibrante o el mate para un acabado más suave y discreto. Se desliza fácilmente en los bolsillos, deja los puertos accesibles y resiste el uso diario, llevando un toque de alegría navideña a donde quiera que vayas.

Características del producto
- Protección de doble capa: carcasa de PC + revestimiento de silicona TPU para absorción de impactos
- Compatible con MagSafe: módulo magnético integrado para accesorios
- Impresión 3D envolvente: transferencia de imagen de alta densidad de borde a borde
- Opciones de acabado: disponible en brillante o mate.
- Acceso claro: puertos abiertos y recortes precisos para la cámara

Instrucciones de cuidado
Limpie la carcasa con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.

Representante en la UE : HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House, piso 102, Limassol, Mesa Geitonia, 4003, CY

Información del producto : Marca genérica, garantía de 2 años en la UE e Irlanda del Norte según la Directiva 1999/44/CE

Advertencias, Peligro : Producto blanco procedente de Corea del Sur. Para adultos.

Instrucciones de cuidado : Limpie la funda con un paño suave y húmedo de algodón o microfibra. Evite el uso de productos químicos.